Vector Beetleweight Kit
Vector Beetleweight Kit Vector Beetleweight Kit Vector Beetleweight Kit Vector Beetleweight Kit
Chevron down Icon
$499.99

Orders will ship within 7 days (this is to allow time to print the parts.  After our first batch we will stock the printed parts)

Introducing Endbots first beetleweight robot kit Vector.

This horizontal spinner is designed to be reliable, simple to assemble, and easy to operate.  This kit would be perfect second combat robot (Everyone's first robot should be weaponless in our opinion).  

Warning: This is not a toy!

Only use this product within a fully enclosed arena with at least 1/4" polycarbonate guarding.  Operation (Including testing) outside of a suitable arena could cause serious injury.  By purchasing this product you acknowledge that you are responsible for the safe use of this product and that Endbots or its employees are not liable for any injuries or damages.

 

Assembly Video

 


Check out Vector's first event CIRC 2019.  We took third place. 

 

Tools Required

  • Soldering Iron & Solder
  • Wire Strippers
  • Needle nose pliers or Twist Hub Key

 

 Kit Version Requires

  • Transmitter & Receiver
  • Drive ESC (we recommend our DESC)
  • Battery (3s or 4s lipo > 450mah we recommend this 3s or 4s)
  • Battery Charger
  • Wire
  • Heatshrink
  • Loctite (Green Recommended)

 

Fully Assembled Version Requires*

  • Dsm2 Compatible Transmitter
  • Battery (3s or 4s lipo > 450mah we recommend this 3s or 4s)
  • Battery Charger

*Battery plug will be terminated with an XT30.

 

Specifications

  • Durable Onyx 3D printed parts
  • Modular design for easy access and servicing.
  • AR500 Laser Cut Bar Spinner
  • Powerful 2212 980kv motor
  • Integrated Safety Key 
  • Weight ~43oz  (less battery)
  • 5oz for Battery and modifications.

Includes

  • 7075 Aluminum Top, Bottom, & Side Guards
  • AR500 Laser Cut Bar Spinner
  • 3D Printed Weapon Hub, Motor Hub, Back, & Side (2)
  • 20mm Motors for Drive
  • 980kv Brushless Motor for Weapon Drive
  • 90 Tooth x 0.25" XL Belt
  • Brushless ESC
  • Fingertech Twist Hubs & Wheels (SUBSTITUTING SNAP HUBS AS TWIST ARE OUT OF STOCK FOR THE MOMENT)
  • Fingertech Power Switch
  • Aluminum Spacer & Bearing
  • 3mm Led
  • Safety Pin
  • Hardware Kit (all fasteners needed to assemble)
  • Tool Kit (all tools needed to disassemble except Twist Hub Key)

 

Files *Files marked update are most current

Note:

  • Aluminum parts are finished in the tumbler may require light deburring.